Classification of diving suit

1. Dry diving suit: wearing a dry diving suits, the body completely isolated from the water, according to the water temperature situation, you can strengthen the insulation inside the sweater. Must be trained before use for diving in cold areas.
Dry diving suits for the most commonly used diving suits, made of foam synthetic rubber material, the general thickness from 3mm to 10mm, into the cold water is not separated from the clothes and then penetrate and quickly heat up by the heat conduction, Inactive bubble isolation, to prevent the loss of body heat, fit wet submersible, can make internal and external water flow as much as possible to reduce the isolation effect is better.
The main function of the diving suit is to prevent the diving when the body temperature lost too fast, resulting in loss of temperature. Second, the diving suit can also protect the body from being cut off the rocks, as well as jellyfish anemones and other biological damage.
Second, the diving suit must be fit, diving suits and the body between the sea and the exchange of the less, the better the warmth of the diving suit. At present, the most common diving suit cloth is nylon cloth and Lai Kabu two kinds of cloth in the middle of the cloth are foam rubber, so as long as the same thickness, the two fabrics made of diving clothing warmth effect is the same.

The difference between the two fabrics in its cloth, one is nylon cloth, one is Leica cloth. Lycra in the unit area of the number of lines more knitted more dense, so more wearable. In addition, the elasticity of the Lycra is better, so Leiba made diving suit will not be deformed.

Overall, Lycra's diving suit life will be longer than the nylon cloth diving suit. In addition there is an unrelated to the functional considerations, the current market Laika fabric can be selected more colors, so if you want to dazzling in the water, for a best male and female, Lycra fabric will be a better choice. As for the nylon fabric can also occupy a place in the market, mainly because of its relatively low prices.
2. Wet diving suits: This diving suit is made of foamed rubber or nylon cloth. Wet diving suits must fit fit on the skin, into a small amount of water in the diving suit and the skin was not flow between the body to maintain body temperature.
In the frigid waters, the use of dry diving suits is more common, of course, they are also more wet diving suit, style is more than one type. There are at least three kinds of materials for dry diving suits, foam synthetic rubber, synthetic rubber and nylon material. Dry-type diving suits are much higher than wet-type diving suits because of the need for special waterproof zippers and other accessories such as dry diving inflatable devices (since air must be injected and drained into dry diving suits to maintain a neutral balance Dry diving suit has a pipeline from the regulator at the first level of the pressure interface to the dry diving suit inflated). The use of dry diving suits must be specially trained to learn how to control and use inflatable №. Dry diving clothes maintenance and maintenance method is to dive after the dry diving suit to soak water and avoid exposure to the sun, as far as possible in a ventilated and cool place. Zippers should be often lubricated, not long-term folding to prevent the formation of foam synthetic rubber can not restore the wrinkles.